Wheel Repair Technicians Fairbanks AK

There are many tips to sprucing up your car’s paint or preventing the interior from looking worn in the first place, but the wheels need attention too. If your painted metal is looking the worse for wear, here’s how to repair it yourself without spending a fortune.

Collision Masters
(907) 451-8456
4061 Bradley Court
Fairbanks, AK
Certifications
Blue Seal Certified
Membership Organizations
National Institute for Automotive Service Excellence (ASE)

Data Provided by:
Automotive Skills Center
(907) 353-7434
3730 Oak St
Fort Wainwright, AK
 
Aurora Motors
(907) 459-7000
3285 S Cushman Street
Fairbanks, AK
Services
Clutch Repair,SUV Repair,Truck Auto Body

Chaz Limited
(907) 458-2500
511 30th Ave
Fairbanks, AK
Specialty
Paint & Body Work, Upholstery
Hours
Mon:8:00 am-5:00 pm
Tue:8:00 am-5:00 pm
Wed:8:00 am-5:00 pm
Thu:8:00 am-5:00 pm
Fri:8:00 am-5:00 pm
Sat:(Closed)
Sun:(Closed)
Payment
Cash

Fears Automotive Inc
(907) 456-6635
875 Old Richardson Hwy
Fairbanks, AK
 
Alyeska Fleet Management Facility
(907) 450-5369
3311 Lathrop Street
Fairbanks, AK
Certifications
Blue Seal Certified
Membership Organizations
National Institute for Automotive Service Excellence (ASE)

Data Provided by:
Calista Corp
(907) 356-1705
4161 8th St
Fort Wainwright, AK
 
Alaska Detail Services
(907) 452-1001
548 Front St
Fairbanks, AK
 
Auto Trim Design
(907) 456-8400
2550 S Cushman Street
Fairbanks, AK
Services
Audio and Video Installation,Fabrication and Restoration

Collision Masters
(907) 451-8456
4061 Bradley CT
Fairbanks, AK
Specialty
Paint & Body Work, Upholstery
Hours
Mon:7:30 am-5:00 pm
Tue:7:30 am-5:00 pm
Wed:7:30 am-5:00 pm
Thu:7:30 am-5:00 pm
Fri:7:30 am-5:00 pm
Sat:(Closed)
Sun:(Closed)
Payment
Cash, Check

Data Provided by:

DIY Wheel Repair

Do-It-Yourself Wheel Repair By Alison Lakin, Associate Editor

Scratched your wheels? We know exactly how annoying that can be. There are many tips to sprucing up your car’s paint or preventing the interior from looking worn in the first place, but the wheels need attention too – especially since they usually take the brunt of urban driving; parallel parking and curbside drop-offs are a rim’s worst nightmare. If your painted metal is looking the worse for wear, here’s how to repair it yourself without spending a fortune.

First, you’ll need the following materials:
Scratch filling primer
Wheel paint (to match your specific wheel color)
Clear lacquer
Paint thinner
Bondo spot putty
Sand paper 240 and 400 grit
Masking tape

Step 1: Remove the wheel from the car. If you choose to keep it on, make sure to fully cover the car with a cloth or paper so as to seal it from the spray of the paint.
 
Step 2: Clean the wheel. Soap-up, scrub and shine that puppy. Then use paint thinner to specifically clean the damaged area, nothing more. You want to remove all polishes and waxes from the surface in order to properly repair it, which means you’ll need to really rub the area, wipe it down and repeat.

Step 3: Once the damaged area is completely clean, you’ll need to prepare the wheel for sanding. If the tire is still on, use the masking tape to cover the area underneath where the wheel meets the tire. You can use this time to completely cover the tire to protect it from paint as well. It may be a pain, but scraping paint spray off the rubber is much worse.

Step 4: Gently sand the damaged area using 240-grit sandpaper. Once you’ve sanded it down a bit, wipe the area clean and apply the putty to the scrape. Just cover the specific area and don’t worry about getting it flat and smooth because you’ll be sanding it down. Let the putty completely dry before attempting to sand it smooth using the 400-grit sandpaper. You want to make sure it feels flush to the original wheel surface – a flat block will help to create the desired effect.

Step 5: Once again, if the wheel has not been removed from the car and tire you’ll need to fully protect any exposed areas you don’t want flakes of paint to stick to. It’ll happen, trust us.

This is where the scratch filling primer comes in. Spray it on the repair area, let dry and then sand it down with 400-grit or finer sandpaper. Add more putty if there are any uneven areas and repeat. It’s very important to clean off the overspray with a rag immediately after spraying the primer and paint. There’s no reason to get paint anywhere but the area on which you’re working.

Step 6: Now comes the painting. You’ll want to read the instructions on the spray can for the most correct application techniques. We’d recommend testing the spray paint out on some scrap metal before applyi...

Click here to read the rest of the article from DriverSide